Choose your product
€839,00 * Incl. tax
This product is not on stock Delivered within 15-20 business days
Pros and Cons
  • This station has Load balancing as an option
  • You can manage the charger through an app on your phone
  • Small design fits anywhere
  • Little space inside the charger for installation
  • No RFID reaader available
  • Distance from wifi router is limited
Order even cheaper with combi solutions
Cable holder - black
Wall bracket
€878,99 €868,99
Connection type: 1 phase, Maximum power: 16 amps
30mA Residual Current Circuit Breaker RCCB with Overcurrent Protection
€868,00 €858,00
One or two chargers: Two, Cable suspension system: No, Charger plate: 310x200-VRT
Design your own mounting pole
€1.138,00 €1.118,00

Pulsar Plus Wallbox 7.4 kW

_x000D_

The Wallbox Pulsar Plus 7.4 kW is one of our most versatile home chargers with Wi-Fi, Bluetooth and other smart functions. This is a suitable option for cars with different load capacities. The load capacity is determined by the on-board charger of the battery in your car and by your mains connection.

_x000D_

With fixed type 1 charging cable

_x000D_

The Wallbox 7.4 kW Pulsar Plus charging station is equipped with a fixed Type 1 charging cable of 5 meters as standard. Because of the fixed cable, it is no longer necessary to remove the cable from the trunk every time. You just have to take the plug from the holder and put it in the car to start charging.

_x000D_

Applicable to 1-phase and 3-phase connections

_x000D_

This smart Wallbox charging station is suitable for charging your car with a maximum of 1x32A (7,4 kW), but you can set this in values ​​between 6A and 32A so that this charging station is perfectly applicable to any network connection and can supply different charging capacities. This allows you to charge any type 1 electric car!

_x000D_

The Wallbox Pulsar Plus 7,4 kW supports both 1-phase charging and is compatible with any 1-phase and 3-phase electrical connections.

_x000D_

Advantages of the 22 kW Wallbox Pulsar Plus:

_x000D_
    _x000D_
  • No subscription to use remote station management
  • _x000D_
  • Including 5 meter fixed Type 1 charging cable
  • _x000D_
  • Connection with Wi-Fi and Bluetooth
  • _x000D_
  • Connectivity via the Wallbox app
  • _x000D_
  • Lower installation costs i.v.m. integrated DC detection
  • _x000D_
  • Expandable with Dynamic Load Balancing
  • _x000D_
  • The possibility to automatically settle loading costs via a back office, for the benefit of lease or business drivers.
  • _x000D_
_x000D_

_x000D_

No subscription fees

_x000D_

No back office subscription is required for this charger. Management is possible via the Wallbox app, via the myWallbox portal, via Wi-Fi or Bluetooth.

_x000D_

myWallbox portal

_x000D_

Configure, monitor and manage your Pulsar Plus from the myWallbox portal via a mobile app or the web portal. With the myWallbox portal you get real-time information about consumption, charging time and energy costs. You can set the load capacity and lock (and unlock) the charging station to prevent misuse.

_x000D_

_x000D_

The Wallbox Pulsar connects via Bluetooth Smart Connectivity. This makes it possible to receive on-the-go information when you come within reach of the charging station. Functions such as activation of charging sessions, insight into energy consumption and charging costs and automatic software updates make the Wallbox Pulsar the smartest - and smallest - charging station on the market. The MyWallbox platform is a personal digital environment that allows you to monitor charging sessions, manage your charging station and access services such as Smart Charging

_x000D_

Wallbox app for smartphone and tablet

_x000D_

You can view and manage all device settings from your mobile phone or tablet via the Wallbox app. The functions of the app include setting the charging current, locking and unlocking the charging station, scheduling charging sessions (for example, when the energy price is lower) and more.

_x000D_

Schedule loading sessions

_x000D_

You can schedule loading with your Wallbox Pulsar Plus. You can use the app to set at what times your charger may or may not actively charge. For example, when you use peak and off-peak rates for your energy consumption, you can set your car to only charge during off-peak rates. This allows you to charge your electric car at a lower rate.

_x000D_

LED ring

_x000D_

With the help of the LED ring this charging point gives you useful information about the status.

_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_
Wallbox status groen_x000D_
Green: ready
_x000D_ The charger remains in this state when it is not connected to a car and is ready for use.
Wallbox status turquoise_x000D_
Turquoise (lichtblauw): aangesloten
_x000D_

The charger detects that it is connected to a car. There are a few situations where the charger can stay in this state:

_x000D_

Waiting for the car's request: this situation occurs when the car does not want to charge, although the charger is ready. This has one of the following causes:

_x000D_
    _x000D_
  • The car's battery is fully charged
  • _x000D_
  • The transition between connecting the car and charging
  • _x000D_
  • The transition between recharging and starting charging
  • _x000D_
_x000D_

Charging paused: the user paused charging via the app.

_x000D_
    _x000D_
  • End of schedule: When a schedule is complete, the charger stops charging.
  • _x000D_
_x000D_
Wallbox status turquoise pulserend_x000D_
Turquoise flashing: connected (planned)
_x000D_

When the Pulsar is connected to the car, if the halo is turquoise and pulses, then a charging session is planned within the next 12 hours. It does not charge until the start time of the programmed schedule.

_x000D_
Wallbox status blauw_x000D_
Blue: Charging
_x000D_ The charging process has been started and the car is charging.
Wallbox status geel_x000D_
Yellow: locked
_x000D_ The charger is locked. Only an authorized user can unlock it. User authentication must be made via the Wallbox app or myWallbox portal. 
Wallbox status rood_x000D_
Red: Error
_x000D_ The charger is in error mode. Do not attempt to charge in this state. Contact Wallbox Service so that they can advise you on this subject. 
_x000D_

Dynamic Load Balancing

_x000D_

The Power Boost function ensures that you use the maximum residual current within your current electricity connection to charge your car as quickly as possible. And all this without you having to worry about whether your stop or the main fuse will fly out. Is your washing machine switched on? Then the car loads less quickly. In practice, the charging station is in constant contact with a smart module in the meter cupboard. This module continuously monitors how much power is available at that time. All electrical appliances in the house have priority over the charging station. The remaining capacity is available for charging the car. In this way safe and optimum use is made of the power connection and overload is prevented.

_x000D_

Installation

_x000D_

We wallbox is very easy to install but we always recommend that a trained specialist do this.

_x000D_

_x000D_

Where does the wallbox come from

_x000D_

Wallbox is a Spanish tech start-up with the main objective of designing, producing and distributing innovative loading systems to support the arrival of sustainable transport. ... Wallbox is focused on helping the EV industry turn electric and plug-in hybrid cars into an attractive alternative to more traditional modes of transportation.

_x000D_

Documentation

_x000D_ _x000D_

 

_x000D_

  • Dimensions (lxbxh in mm):166x163x82
  • Cable length (in meters):5 meter
  • Max Charging Speed in km/h:40 km/hour
  • Max Charging Speed in kW:Up to 7,4kW
  • Plug type Car side:Type 1
  • Plug type Charge station side:Fixed type 1 cable
  • Cable Attached or Socket:Cable Attached
  • Display:
  • Phases:Max 1 phase
  • Amperage:Max 32A
  • Network Technologies Supported:Wifi en Bluetooth
  • Mobile app Support:No
  • Remote station management:Mywallbox https://wallbox.com/en_catalog/mywallbox
  • Scheduled Charging:Yes, via app and cloud services
  • Colour:Black or White
  • RFID reader:No
  • Load Balancing:Yes, load balancing via optional Power Booster
  • Solar charging:
  • Plug & Charge Enabled:No
  • Requires Professional Installation:Yes
  • IP Rating:IP54
  • Number of vehicles that can be charged:1
  • RCD type build in:30mA Type A
  • 6mA DC Current Detection:Yes
  • Home Automation Support:No
  • MID certified meter:Yes
  • kWh meter Build in:Yes
  • Smart Tesla charge port opening :Not Applicable

Related products

Cable Adapter Type 2 car to Type 1 charging point

DUOSIDA Cable Adapter Type 2 car to Type 1 charging point

view products

 
Wall bracket

Wallbox Wall bracket

view products

 
Type 1 plug holder

DUOSIDA Type 1 plug holder

view products

 
30mA Residual Current Circuit Breaker RCCB

ETEK 30mA Residual Current Circuit Breaker RCCB

view products

 
Type 1 Car to Type 2 Charging station adapter

Soolutions Type 1 Car to Type 2 Charging station adapter

view products

 

Recently viewed

The product is in your shopping basket!

Others also bought these products.

Cable Adapter Type 2 car to Type 1 charging point

DUOSIDA Cable Adapter Type 2 car to Type 1 charging point

€89,00
Wall bracket

Wallbox Wall bracket

€39,99
Type 1 plug holder

DUOSIDA Type 1 plug holder

€11,99